Concrete Pavement Blocks

• Application
• Outdoor pavements, driveways, parking lots, walkways

• Bending Strength
• 4.5-5.0 MPa

• Cement Raw Material
• Other, High-quality OPC/PPC cement

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Grey/Red/Yellow (Customizable)

• Compressive Strength
• 35-45 MPa after 28 days

• Feature
• Other, Interlocking, anti-skid surface

• Fineness
• 350 m2/kg (Blaine)

• Hardening Feature
• Other, Rapid hardening, durable

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• 45-60 minutes

• MgO %
• <6%

• Natural Sand Type
• River sand

• Product Strength Grade
• M40

• SO3 %
• <3%

• Sand Fineness
• Other, Fine/Coarse blend for optimum compaction

• Sand Type
• Other, Washed river sand

• Soundness
• Expands <10mm, conforms to IS:4031

• Weight
• 3-5 kg per piece

• Application
• Pavements, Walkways, Driveways, Landscaping

• Bending Strength
• > 3.5 MPa

• Cement Raw Material
• Other, OPC/PPC Grade Cement

• Cement Type
• Other, Portland Pozzolana Cement (PPC)

• Color
• Other, Grey/Red/Yellow (As per order)

• Compressive Strength
• > 40 MPa

• Feature
• Other, High Strength, Weather Resistant, Long Life

• Fineness
• High Surface Fineness

• Hardening Feature
• Other, Quick Setting

• Heat of Hydration
• Other, Low

• Initial Setting Time
• > 30 Minutes

• MgO %
• < 4%

• Natural Sand Type
• Crushed/Manufactured Sand

• Product Strength Grade
• M40

• SO3 %
• < 2.5%

• Sand Fineness
• Other, Fine to Medium

• Sand Type
• Other, River/Manufactured Sand

• Soundness
• < 10 mm Expansion

• Weight
• Approx 3-5 kg per piece

• Application
• Paving of patios, driveways, walkways, parking lots, roads

• Bending Strength
• > 3.5 MPa

• Cement Raw Material
• Other, Portland Cement, Coarse Aggregate, Fine Aggregate, Water

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Grey / Red / Yellow / Custom

• Compressive Strength
• Above 40 MPa

• Feature
• Other, High Durability, Interlocking, Weather Resistant, Skid Resistant, Eco-friendly

• Fineness
• Below 10% retained on 90 micron sieve

• Hardening Feature
• Other, Hydraulic

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• Not less than 30 minutes

• MgO %
• Below 5%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M40

• SO3 %
• Less than 2.5%

• Sand Fineness
• Other, Zone II - Medium Fine

• Sand Type
• Other, Crushed Sand

• Soundness
• Less than 10 mm expansion

• Weight
• 3 - 4 kg per piece (approx.)

• Application
• Pavements, Walkways, Driveways, Parking Lots, Pathways, Outdoor Flooring

• Bending Strength
• 3.5 4.5 MPa

• Cement Raw Material
• Other, Ordinary Portland Cement (OPC), Coarse Aggregate, Fine Aggregate (Natural Sand), Water

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Grey (Natural), Optionally available in Red, Yellow, and other shades

• Compressive Strength
• 35 - 40 MPa after 28 days

• Feature
• Other, High Load Bearing, Skid Resistant Surface, Interlocking Design

• Fineness
• Fineness modulus of sand: 2.2 - 2.6

• Hardening Feature
• Other, Rapid Hardening after Demolding

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• Not less than 30 minutes

• MgO %
• 6.0%

• Natural Sand Type
• River Sand, Washed and Graded

• Product Strength Grade
• M35 (Grade B as per IS 15658)

• SO3 %
• 3.0%

• Sand Fineness
• Other, Medium to Fine Graded, conforms to IS 383

• Sand Type
• Other, Natural Fine Aggregate

• Soundness
• Within IS 12269 standards, <10 mm Expansion

• Weight
• Approx 3.5 4.0 kg per block (for standard 60 mm thickness)

• Application
• Heavy duty pavements, industrial floors, ports, container yards, roads, parking areas

• Bending Strength
• Greater than 4.5 MPa

• Cement Raw Material
• Other, High-grade Portland cement, natural aggregates

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Gray

• Compressive Strength
• Minimum 40 MPa (tested at 28 days)

• Feature
• Other, High durability, wear resistance, weatherproof

• Fineness
• <10% residue on 90 micron sieve

• Hardening Feature
• Other, Rapid setting, high early strength

• Heat of Hydration
• Other, Low

• Initial Setting Time
• 30 minutes (minimum)

• MgO %
• Less than 6%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M40

• SO3 %
• Less than 3.0%

• Sand Fineness
• Other, Medium to fine (as per IS:383)

• Sand Type
• Other, Crushed stone sand / River Sand

• Soundness
• Less than 10 mm expansion

• Weight
• Approx. 4-5 kg per block (depends on size)

• Application
• Pavements, Driveways, Parking Areas, Walkways

• Bending Strength
• 3.5-4.5 MPa

• Cement Raw Material
• Other, Portland Cement, Aggregates, Pigments

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Red, Yellow, Grey, Customized

• Compressive Strength
• 35-45 MPa (After 28 days)

• Feature
• Other, Durable, Interlocking, Anti-Skid Surface

• Fineness
• <10% Residue on 90 Micron Sieve

• Hardening Feature
• Other, Hydraulic

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• Minimum 30 minutes

• MgO %
• <6%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M30, M35, M40

• SO3 %
• <3%

• Sand Fineness
• Other, Zone-II (IS 383:2016)

• Sand Type
• Other, Crushed Sand/Manufactured Sand

• Soundness
• <10 mm (Le Chatelier)

• Weight
• 3-5 kg per piece

• Application
• Footpaths, driveways, outdoor pavements, landscaping

• Bending Strength
• 4.5 MPa

• Cement Raw Material
• Other, Portland cement, natural sand, aggregate

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Light Grey

• Compressive Strength
• 30-40 MPa

• Feature
• Other, High load bearing capacity, weather resistant, interlocking design

• Fineness
• 3000 cm2/g

• Hardening Feature
• Other, Quick setting and hardening

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• 45 minutes

• MgO %
• 1.8%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M35

• SO3 %
• 2.5%

• Sand Fineness
• Other, Medium Fine

• Sand Type
• Other, Crushed and natural sand blend

• Soundness
• < 10 mm

• Weight
• About 4 kg per block

• Application
• Driveways, Walkways, Pavements, Landscaping

• Bending Strength
• Above 3.5 MPa

• Cement Raw Material
• Other, Ordinary Portland Cement, Fine Aggregate, Coarse Aggregate, Water

• Cement Type
• Other, OPC 43 Grade

• Color
• Other, Grey, Red, Yellow (Customizable)

• Compressive Strength
• 30-50 MPa

• Feature
• Other, High Durability, Slip Resistant, Interlocking Design

• Fineness
• 350 m/kg (Blaine)

• Hardening Feature
• Other, Hydraulic Hardening

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• Not less than 30 minutes

• MgO %
• Less than 6%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M30/M35 Grade

• SO3 %
• Less than 3%

• Sand Fineness
• Other, Medium (Zone II as per IS 383)

• Sand Type
• Other, Natural River Sand

• Soundness
• Less than 10 mm (IS:4031, Part 3)

• Weight
• Approx. 4.5-5 kg per piece

• Application
• Driveways, walkways, parking lots, patios

• Bending Strength
• 3.5 N/mm

• Cement Raw Material
• Other, Portland cement, fly ash, slag

• Cement Type
• Other, OPC 43 Grade

• Color
• Other, Grey, Red, Yellow, Black

• Compressive Strength
• 25-35 N/mm

• Feature
• Other, Interlocking design, high load-bearing capacity

• Fineness
• 300 m/kg (Blaine method)

• Hardening Feature
• Other, Rapid initial hardening

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• 30-45 min

• MgO %
• 1.8%

• Natural Sand Type
• River sand

• Product Strength Grade
• M30

• SO3 %
• 2.5%

• Sand Fineness
• Other, Medium (600-800 microns)

• Sand Type
• Other, Crushed and river sand mix

• Soundness
• <10 mm expansion

• Weight
• 3-4 Kg per piece (varies by shape)

• Application
• Pavements, driveways, walkways, parking areas, landscaping zones

• Bending Strength
• 4.5 6 MPa

• Cement Raw Material
• Other, High-quality clinker, gypsum, and pozzolanic materials

• Cement Type
• Other, Portland Pozzolana Cement (PPC)

• Color
• Other, Grey/Red/Yellow (as per requirement)

• Compressive Strength
• 30 40 MPa

• Feature
• Other, High load-bearing, interlocking edges, weatherproof

• Fineness
• 3500 4000 cm/g (Blaine)

• Hardening Feature
• Other, Rapid hardening for early strength

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• > 30 minutes (typically 45 minutes)

• MgO %
• 6.0%

• Natural Sand Type
• River sand (washed and graded)

• Product Strength Grade
• M30/M35/M40

• SO3 %
• 3.0%

• Sand Fineness
• Other, Fine to medium graded (zone II/III as per IS 383:2016)

• Sand Type
• Other, Crushed stone sand (alternative to natural sand)

• Soundness
• 10 mm (Le Chatelier method)

• Weight
• 2.5 4.5 kg per block (depending on size and thickness)

• Application
• Pavements, Walkways, Driveways, Parking Areas

• Bending Strength
• 4.0 MPa

• Cement Raw Material
• Other, High Quality Portland Cement

• Cement Type
• Other, OPC 43 Grade

• Color
• Other, Grey, Red, Yellow, Custom

• Compressive Strength
• 30 MPa (Minimum)

• Feature
• Other, Interlocking, Weather Resistant, Low Maintenance

• Fineness
• 320 m/kg (Blaine)

• Hardening Feature
• Rapid Hardening

• Heat of Hydration
• Other, Low

• Initial Setting Time
• Minimum 30 Minutes

• MgO %
• 2.0%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M30

• SO3 %
• 2.5%

• Sand Fineness
• Other, Medium to Fine

• Sand Type
• Other, Washed, Graded

• Soundness
• Less than 10 mm

• Weight
• 3.5 - 4.5 kg per block

• Application
• Landscape, Driveway, Pathway, Garden, Parking

• Bending Strength
• 5.5 MPa

• Cement Raw Material
• Other, Portland Cement, Fly Ash, Aggregates

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Other, Grey/Red/Yellow/Green

• Compressive Strength
• 45 MPa

• Feature
• Other, Eco-Friendly, Permeable, Slip Resistant

• Fineness
• 350 m/kg

• Hardening Feature
• Rapid Hardening

• Heat of Hydration
• Other, Low

• Initial Setting Time
• 45 minutes

• MgO %
• 1.8%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M40

• SO3 %
• 2.5%

• Sand Fineness
• Other, Medium Sand 2.5 3.0 mm

• Sand Type
• Other, Crushed and Natural Sand Blend

• Soundness
• <10 mm

• Weight
• 3.8 kg per block

• Application
• Construction, Partition Walls, Load-Bearing Walls

• Bending Strength
• 3.5 MPa (average)

• Cement Raw Material
• Other, OPC (Ordinary Portland Cement) and high-quality aggregates

• Cement Type
• Other, OPC 43 and 53 Grade

• Color
• Grey

• Compressive Strength
• 8.5 to 15 MPa (N/mm)

• Feature
• Other, High Durability, Precise Dimensions, Sound Insulation, Fire Resistance, Eco-Friendly

• Fineness
• Below 10% retained on 90 micron sieve

• Hardening Feature
• Rapid Hardening

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• 30 minutes

• MgO %
• 6%

• Natural Sand Type
• River Sand or Manufactured Sand

• Product Strength Grade
• Grade A (as per IS 2185)

• SO3 %
• 2.5%

• Sand Fineness
• Other, Fine to Medium (as per IS 383:2016)

• Sand Type
• Other, Crushed Sand, Natural Sand

• Soundness
• Expansion not more than 10 mm

• Weight
• 18 to 20 kg/block

• Application
• Pathways, Walkways, Driveways, Landscaping

• Bending Strength
• 5-8 MPa

• Cement Raw Material
• Other, Portland Cement, Natural Sand, Gravel, Water

• Cement Type
• Other, Ordinary Portland Cement (OPC)

• Color
• Grey

• Compressive Strength
• 35-45 MPa

• Feature
• Other, High Load Bearing, Weather Resistant, Non-slip Surface

• Fineness
• 350-400 m2/kg

• Hardening Feature
• Rapid Hardening

• Heat of Hydration
• Other, Moderate

• Initial Setting Time
• 30-45 minutes

• MgO %
• <4.0%

• Natural Sand Type
• River Sand

• Product Strength Grade
• M35

• SO3 %
• 1.5-2.0%

• Sand Fineness
• Other, Medium to Coarse

• Sand Type
• Other, Washed Sand

• Soundness
• <10 mm expansion

• Weight
• 2.5-3.5 kg per piece

• Cement Type
• Common Cement

• Color
• White

• Natural Sand Type
• Crushed Sand

• Sand Fineness
• Medium

• Weight
• 15kg Kilograms (kg)